Our online one-to-one SPM Grafik Komunikasi Teknikal tuition gives you an experienced teacher who builds your spatial reasoning and checks your technical views for errors. The first class is a one-hour trial class (from RM50).
Who this tuition helps
Technical graphics marks fall in places that can be named.
- Picturing the object. The student cannot rotate a shape mentally, so a missing view feels like guessing.
- Views that disagree. The front view shows the block 40 mm wide, but the top view shows 38 mm.
- Line and dimension conventions. Hidden lines, centre lines or dimension placement are applied inconsistently.
A teacher can compare your description with the correct views and point at the exact line that is wrong.
What a lesson looks like: catching an inconsistency
This is a worked example with invented dimensions.
A block is 40 mm wide, 30 mm high and 20 mm deep. A step 10 mm wide and 10 mm high is cut away along the whole depth of the top right edge.
The teacher asks the student to predict first. From the front, the outline is an L-shape, because the top right corner is missing. From above, the outline is still a 40 mm by 20 mm rectangle, with one line drawn 10 mm in from the right edge where the step begins.
Now the student’s drawing shows a full rectangle in the front view, but a line 10 mm from the right edge in the top view. The teacher asks one question: does the front view agree with the top view? The line in the top view means there is a step, and a step must show in the front view, so a full rectangle cannot be right.
The check uses three rules.
- Widths match between the front and top views.
- Heights match between the front and side views.
- A feature seen in one view must also show in every other view it touches.
These rules stay the same in whichever projection system your course uses. Build the habit with checking consistency between views and reading spatial information from an original diagram.
What online lessons can and cannot do
Lessons suit spatial reasoning, view prediction, dimension and line convention review, explaining why a representation was chosen and feedback on your drawing.
Precision drawing with school instruments, drawing-office facilities and any supervised assessed drawing stay at school. A teacher cannot draw your submission for you and cannot promise a grade.
Can an online lesson check accuracy?
It checks logic well and millimetre accuracy less well. The teacher can tell you a line is in the wrong place or a dimension is missing. Fine line quality and exact measurement are best judged on paper in front of you, so the teacher asks you to measure and report.
How starting works
In your WhatsApp message, give your form and the type of drawing that troubles you. We assign an experienced teacher and agree the fee with you before the one-hour trial class (from RM50). After the trial you decide whether the teacher is a good fit, and you can ask for another teacher if not.
Use the trial lesson agenda builder to choose a drawing for the first lesson. How our online tuition works describes what comes after.
Keep learning for free
The structured-answer self-review tool helps you check written explanations. Our SPM tuition overview lists the other subjects.